Latest computer room monitor solution configuration list(1)
Published：2011-11-10 17:57
|
NO.
|
Product Name
|
Content
|
|
1
|
Monitor Host and Background System
|
|
|
1.1
|
IP Power2009 power environment network monitor system software
|
WEB interface, B/S architecture, the software is stable and reliable, operation is simple and convenient, users can real time learn about the computer room running situation, and this software has message box alarm, voice alarm, email alarm, SMS alarm,etc
|
|
1.2
|
Mobile SMS Sending Module
|
SMS Sending Platform
|
|
1.3
|
Voice Dailing Alarm Host
|
Voice Dailing Alarm Platform
|
|
1.4
|
Local Sound-Light Alarm Device
|
Sound-light Alarm Platform
|
|
2
|
UPS Power Monitor System
|
|
|
2.1
|
Netmate II mini UPS Network Monitor Adapter (internal/3 phase)
|
Monitor 3 phase UPS, monitor 2 circuits temperature and humidity module, can be insected into Rackslot, each UPS need one device and need to provide accurate UPS model, this device can also expand one battery power inspection instrument。
|
|
2.2
|
Netmate II mini UPS Network Monitor Adapter (internal/1 phase)
|
Monitor 1 phase UPS, monitor 2 circuits temperature and humidity module, can be insected into Rackslot, each UPS need one device and need to provide accurate UPS model, this device can also expand one battery power inspection instrument。
|
|
3
|
Computer Room Environment Parameter Monitor System
|
|
|
3.1
|
Sitemate AE Computer Room Monitor Host
|
Able to realize 8 circuits temperature and humidity monitor, with 16 circuits dry-contact detect signal, can connect(smoke, door contact, infrared linkage module, etc), 2 circuits relay switch output, support air conditioning infrared control functon, etc
|
|
3.2
|
Intelligent High Precision Temperature and Humidity Detection Module
|
Special in computer room, high precision digital temperature and humidity sensor, temprature range is -55℃～+155℃, accuracy is ±0.5℃, Modbus RTU communication interface, full-duplex mode, strong anti-interference, stable and reliable.(one device/20～30㎡ )
|
|
3.2
|
Intelligent High Precision Temperature and Humidity Detection Module（With OLED Display）
|
Special in computer room, high precision digital temperature and humidity sensor, temprature range is -55℃～+155℃, accuracy is ±0.5℃, Modbus RTU communication interface, full-duplex mode, strong anti-interference, stable and reliable.(install one device/20～30㎡ )
|
|
3.3
|
Smoke Sensor
|
Monitor computer room smoke situation(install one device/20～30㎡ ), user can configure according to the real size of the computer room, one smoke sensor takes one switch quantity detection terminal.
|
|
3.4
|
Infrared Detector
|
Infrared double identification detector can judge whether the intrusion has been happened in related area by infrared microwave way, a infrared double identification detector takes up a switch quantity detection port
|
|
3.5
|
Fresh Air Switch State Transmitter
|
Used for detecting the switch state of air conditioning, fresh air, etc, it can be connected with Sitemate AE, only takes up one switch quantity detection port.
|
|
3.5
|
Common Air Conditoning Switch State Transmitter
|
Used for detecting the switch state of air conditioning, fresh air, etc, it can be connected with Sitemate AE, only takes up one switch quantity detection port.
|
|
3.6
|
Door Contact Module
|
Used for detecting the switch state of door, it can be connected with Sitemate AE, only takes up one switch quantity detection port.
|
|
3.7
|
Non-localized Leakage Detection
|
|
|
3.7.1
|
Non-Localized Line Leaking Collector
|
when the device has detected the leakage through ASC2100, it will output a relay signal through collector, it can be connected with Sitemate AE, and only takes up one switch quantity detection port.
|
|
3.7.2
|
Non-Localized Line Leaking Cable (10M)
|
It need to be allocated with Non-Localized Line Leaking Collector to detect whether the leaking has been happened, the cable length can be selected(no more than 30M), the price is calculated by meters.
|
|
3.8
|
Common Air Conditioning Monitor System
|
|
|
3.8.1
|
Air Conditioning Intelligent Remote Controller
|
it can remote control air conditioning switch state and can realize the remote restart function automatically.(one air conditioning needs one air conditioning intelligent remote controller), it needs to be allocated with Sitemate AE.
|
|
3.8.2
|
Photoelectric isolated conversion module
|
(one air conditioning needs one air conditioning intelligent remote controller and one photoelectric isolated conversion module), this module is used to change the RS485 signal to RS422 signal, it needs to be allocated with Sitemate AE
|
|
4
|
Localized Leakage Monitor System
|
|
|
4.1
|
Netmate II mini Leaking Monitor Host(internal)
|
One localized leaking detection modue needs to be allocated with one Netmate II mini leaking monitor host.（provide internal webpage, can be allocated with IPPower2009）
|
|
4.2
|
Localized Leaking Detection Module
|
can detect the precise leaking location through LDS-3100-02,then output through RS485 intelligent communication signal.
|
|
4.3
|
Localized Leaking cable（7.5M)
|
The length can be selected according to the real situation, it is mainly used to be allocated with localized leaking detection module to detect the leakage location.
|
|
4.4
|
Leaking Detection Module Outgoing Line
|
accessory
|
|
4.5
|
Leaking Terminal
|
accessory
|
|
4.6
|
Fixed glue stick
|
accessory
|
|
5
|
Precise Power Distribution Cabinet Monitor System
|
|
|
5.1
|
Netmate II mini Precise Power Distribution Cabinet Network Monitor Adapter
|
Used to monitor power distribution cabinet, collect the voltage, current, active power, reactive power and other data of power distribution.(One precise power distribution cabinet needs to be allocated with one Netmate II mini precise power distribution c
|
|
6
|
Common Power Distribution Cabinet Monitor System
|
|
|
6.1
|
Netmate II mini Intelligent Power Distribution Cabinet Network Monitor Adapter
|
Used to monitor power distribution cabinet, collect the voltage, current, active power, reactive power and other data of power distribution.(One common power distribution cabinet needs to be allocated with one Netmate II mini intelligent power distribution network monitor adapter)
|
|
6.2
|
Three Phase Intelligent Power Inspection
|
collect the voltage, current, active power, reactive power and other data of power distribution.(One common power distribution cabinet needs to be allocated with one three phase intelligent power inspection instrument)
|
|
7
|
Common Power Distribution Cabinet Output Core Branch Circuit State Monitor System
|
|
|
7.1
|
Sitemate Power Distribution Switch State Inspection Host
|
able to connect 2 D8H（Utility switch inspection module）at the same time, able to inspect 16 circuits switch state signal, it can be allocated with IPPower 2009.
|
|
7.2
|
Utility Switch Inspection Module
|
can detect 8 circuits utility switch signal at the same time, and output signal to Sitemate, it needs to take up 8 switch state signal detection terminal.
|
|
8
|
Precise Air Conditioning Monitor System
|
|